GitUp G3 Duo Firmware
GitUp G3 Update Instructions
1. Download the firmware file
2. Unzip (if needed) the GIT3FW.bin file using available unzip programs, e.g. WinZip or 7-Zip
3. Copy the GIT3FW.bin file directly onto the microSD card root file, not in any folders (card must be in Fat32 format). Using a card reader is the recommended way to get the file onto the memory card.
4. Insert the microSD card into the camera and power it on via a 5V/1A power source, e.g. USB wall charger, cigarette lighter car adapter or power bank, it will start upgrade automatically. Do not use your computers USB ports!
5. While upgrading, the red LED starts blinking (the light blinks slowly at the beginning, then blinks quickly), when the lights stop blinking, that means the upgrade is finished. The camera will restart and the firmware file will be deleted automatically.
------------------------------------------------------------------------------------------------------------
Firmware Version V2.3
Release Date: 09/25/2019
Change Log:
1. Add: Support Wi-Fi Station Mode;2. Add: Support setting default mode: Video / Photo
------------------------------------------------------------------------------------------------------------
Firmware Version 2.2
Release date: 11/13/2018
Change Log:
1. Fixed: Remote control issue while working with bluetooth remote control
2. Updated: Long press the button on remote control to power on the camera.
------------------------------------------------------------------------------------------------------------
Firmware Version 2.0
Released 08/02/2018
Change Log:
1. Add: Support GitUp bluetooth remote control
2. Improvoed: Support start/stop recording via shutter button while Wi-Fi connected
3. Improved: Support 256GB Microsd card.
------------------------------------------------------------------------------------------------------------
Firmware Version 1.8
Released 05/10/2018
Change Log:
1.Added: USB Mode Option in system setting.
2.Added: Zoom in and Zoom out.
3.Added: Altitude info in Photo EXIF.
4.Added: New setting option in configuration file:
a. Movie Mode: Zoom, Low Light, GPS Stamp
b. Photo: GPS Stamp
c. System Setting: GPS,Zone
5.Added: Slow Motion Mode
6.Added: Option to turn on / off slave camera.
7.Added: Car DVR Option in the settings.
8.Added: 5s and 15s Auto off options.
------------------------------------------------------------------------------------------------------------
Firmware Version 1.2
Release 12/29/2017
Change Log:
1. LED options to add the video button next to the LED control.
2. For the new App, optimize the WiFi function.
3. Compatible with GMA302KU G-Sensor.
4.Gyro function can be turned on or off when recording
---------------------------------------------------------------------------------------------------------------------------
Firmware Version 1.1
Released 11/29/2017
Change Log:
1. Improved: Optimize Spanish Language2. Improved: Better support for GitUp APP.