Your Cart 0

  Free Shipping On US Orders over $49!

Viofo WR1 Firmware

Firmware updates for Viofo A119S dash camera.

Caution!  Incorrectly installing firmware can cause your camera to become inoperable.  Sometimes permanently.  Firmware listed on this site comes directly from the manufacturer.  Install at your own risk and only if you feel confident in doing so.


WR1 Update Instructions:
1. Download the firmware file
2. Unzip (if needed) the FWWR1.bin file using available unzip programs, e.g. WinZip or 7-Zip
3. Open the file and copy the FWWR1.bin file directly onto the microSD card root file, not in any folders (card must be in Fat32 format).  Using a card reader is the recommended way to get the file onto the memory card.
4. Insert the microSD card into the camera and power it on via a 5V/1A power source, e.g. cigarette lighter or power bank, it will start upgrade automatically.
5. While upgrading, the front REC red LED starts blinking (the light blinks slowly at the beginning, then blinks quickly), when the lights stop blinking and the camera restarts, that means the upgrade is finished. The firmware will be deleted automatically after upgrade.
6. When update is complete and camera restarts, go into the menu and default your settings.  Do not miss this step.


Firmware:  Version 1.8

Change Log:

1) Added: Support set / get Car License number and Custom Stamp

2) Added: Support get/change SSID, Password

3) Updated: Long press power button to disable/enable Wi-Fi, Wi-Fi is enabled by default.


Version 1.3  (Click HERE)

Change log:

1. Improved: No beep sound while in play back mode;
2. Added: Enable/Disable beep sound in APP;
3. Added: Automatically format the card while powered on if the file system is exFat or NTFS.


Version 1.2

Change log:

1.  Added: 1 min loop recording option
2.  Added: Image Rotation Feature.


Version 1.1   Released 08/15/17

Change log:

  1. Improved: Not support disable auto recording while external charger plugged
  2. Improved: Wi-Fi transfer speed.


Sold Out