Viofo A329 Firmware
Firmware Updates For the Viofo A329
Update Instructions
1. Download the firmware file
2. Unzip (if needed) the FWA329.bin file using available unzip programs, e.g. WinZip or 7-Zip
3. Copy the FWA229S.bin file directly onto the microSD card root file, not in any folders (card must be in Fat32 format - formatting the card inside the camera will make it Fat32). Using a card reader is the recommended way to get the file onto the memory card.
4. Insert the microSD card into the camera and power it on via a 5V/1A power source, e.g. USB wall charger, cigarette lighter car adapter or power bank, it will start upgrade automatically. Do not use your computers USB ports!
5. While upgrading, the front REC red LED starts blinking (the light blinks slowly at the beginning, then blinks quickly), when the lights stop blinking, that means the upgrade is finished. The camera will restart and the firmware file will be deleted automatically.
6. IMPORTANT!! Now go into the menu and manually default your cameras settings. Do not miss this step!
7. Once the camera restarts, use a paper clip, or something similar, and press the reset button on the side of the camera. There is the letter R just above the reset button hole on the left side of the camera. Press and hold the reset button for about 5 seconds. This will clear the memory buffer.
2. Unzip (if needed) the FWA329.bin file using available unzip programs, e.g. WinZip or 7-Zip
3. Copy the FWA229S.bin file directly onto the microSD card root file, not in any folders (card must be in Fat32 format - formatting the card inside the camera will make it Fat32). Using a card reader is the recommended way to get the file onto the memory card.
4. Insert the microSD card into the camera and power it on via a 5V/1A power source, e.g. USB wall charger, cigarette lighter car adapter or power bank, it will start upgrade automatically. Do not use your computers USB ports!
5. While upgrading, the front REC red LED starts blinking (the light blinks slowly at the beginning, then blinks quickly), when the lights stop blinking, that means the upgrade is finished. The camera will restart and the firmware file will be deleted automatically.
6. IMPORTANT!! Now go into the menu and manually default your cameras settings. Do not miss this step!
7. Once the camera restarts, use a paper clip, or something similar, and press the reset button on the side of the camera. There is the letter R just above the reset button hole on the left side of the camera. Press and hold the reset button for about 5 seconds. This will clear the memory buffer.
*Update process may very slightly from above (lights may flash differently).
________________________________________________________________________________________________
Firmware: V1.1_20250120
Change Log:
- Added: Turn on/off the parking mode by BTR200 remote
- Added: Turn on/off Rear LED
- Optimized: Audio quality
- Optimized: SSD compatibility
- Fixed: Other bugs
_________________________________________________________________________________________________